·The SP9092 series Alarm Interface Unit converts 16 hardwire alarm inputs to SECUPRO alarm contact numbers for use by SECUPRO matrix switcher/controller systems.The matrix switcher/controller systems can be programmed to automatically switch video inputs to video outputs,display presets,and activate auxiliary outputs in response to activated alarm inputs.One alarm signal input corresponds to one alarm output (one normally open contact,one normally close contact).The alarm output can be used to active recorder,annunciators ,or other external alarm associated devices.
·The Dip switch on the rear panel of this system is used to set up the address of this unit.Multiple SP9092 sets can be used in parallel via RS-485 interface to enlarge alarm input capacity.This equipment needs together with SECUPRO system matrix switcher/controller system.
·Input of 16 hard-wired Alarms
·Multiple units cascadable on a single RS-485 link
·Enables the system to automatically respond to external inputs
·Diagnostic LEDs
·Alarm presence indication
·Relays can activate VCRs,annunciators,or other external alarm devices
 


 

 Electrical

·Inputs:16 normally close(NC) alarm contacts or 0-12V-logic level
·Outputs:16 pairs of normally open/normally close contacts
·Output contact capacity:7A/250V
·Alarm signal Outputs:RS-485 interface
·Connectors:removable screw terminals
·Alarm status display:LED
·Power source:220VAC/50Hz;110VAC/60Hz 5W

Mechanical

·Dimension:44.5(H)*432(W)*203(D)mm
·Weight:4Kg
·Case:Antirust oil-sprayed electroplate
·Color:Light yellow case
·Mounting:Desktop or rack mount

Environmental

·Operating Temperature:-10~45℃
·Storage Temperature:-30~70℃
·Humidity :Relative humidity 10%-90%(non-condensing)
·Vibration:3g sine wave,15Hz~2000Hz
·Shock:50g,11ms,1/2 sine wave